Most people have carpets in their homes. And one thing is always frustrating – they get dirty. Basically, like everything else. By no means should you allow dirt to accumulate , these splinters spills. Daily activities pollute the carpet. Even if it seems that you are as neat as possible, your carpets become look old and faded.
Yes, you can contact carpet cleaning Spokane or another company for example, but there are also different ways out. Today we are going to tell you some interesting tips to help you take care of your carpets. Follow them and your carpet floors will look clean, cozy, and like new for years to come.
Vacuum More Frequently
The first tip will not only help keep your carpet clean, but it will also be good for your health. Dust, pet hair and other small debris are breeding places for dangerous bacteria and microorganisms. In particular, dust mites begin to multiply and develop quickly in a littered environment. These parasites carry many diseases and can cause skin problems and allergic reactions. In addition, the dirt that gets on the carpet has abrasive properties, and if it constantly gets on the carpet, over time it can destroy the foundation. So, here we are rescued by none other than a vacuum cleaner. With its help you can remove up to 80% of dirt and debris and not allow the carpet to age before time. Ideally, carpets are vacuumed twice a week, and if the family also has animals, the frequency of cleaning should be increased to three times.
Deep Clean
No matter how often and how diligently you vacuum the carpets, they also need to be deep cleaned. It’s important to do it every 3 months to keep your floors looking fresh and clean. You can do it yourself or turn to professionals. You may rest assured, that after such a procedure, the deeply ingrained dirt will be completely removed, and absolutely any stubborn stains will be cleaned as well.
Trimming
Some types of carpets can crease over time, especially if you have pets. In such cases, the most important thing is not to try to pull the pile, thus you will only make the situation worse. Instead, you should take any handy scissors and gently cut all the pile at the base, this will help prevent further damage.
Absorb Spills
One of the most common causes of dirty carpets is, of course, spilled on them a variety of liquids. But it is necessary to know how to clean such spills because if you do something wrong, it can cost you a lot. One of the key things you should remember is to clean up the spilled liquid as quickly as possible and without any friction on the carpet. First, you will need to apply a cleaning solution to the problem area. Next, you have to blot the stain with something. A piece of clean cloth would be great. This way you will put pressure on the liquid, absorb it and do not let it solidify. You should also wipe the stain from the outside in, not the other way around. This will prevent the stain from spreading.
Clean With Soda and Vinegar
You’ve probably heard that if you use baking soda correctly, you can remove all kinds of stains from your carpet – from coffee and tea to red wine and other caustic substances. The first thing to do is to pour the baking soda onto a clean cloth and try to blot the stain. If the stain becomes lighter, repeat the procedure with more baking soda.
If this does not help, then try using white vinegar and water in a one-to-one ratio. The resulting solution you spray on the problem area and wait 10-20 minutes. That’s enough time for it to be absorbed. Then take a sponge and press to the soaked area to absorb the cleaning solution and the diluted stain. After you remove the stain, you should rinse the area with clean, warm water. The last step is drying the area of the carpet where you removed the stain.
Conclusion
Now that you know a lot more interesting tricks with carpet cleaning, you shouldn’t have any problems with this case. However, don’t forget that if you still can’t get something clean, it might be worth calling in professionals from a cleaning company? Decision is on you.